Kalkasoft Infotech Private Limited

MB460 is an innovative product featured with ZK advanced fingerprint and face recognition technologies. It supports multiple verification methos including face, fingerprint, card, password combinations between them and basic access control functions.
Face Capacity :1000; 
Fingerprint Capacity :2000; 
RFID Card Capacity :2000; 
Transactions Capacity:1,00,000 with Battery Backup which can communicate with Software through TCP/IP, USB Host, Push Data through Internet (WDMS) with 2.8" TFT display with Name & ID Display with Indicator & Voice

FACEPRO672  FACE RECOGNITION TERMINAL adopts deep learning algorithm, which helps to recognize the face faster with higher accuracy. It also supports multiple authentication, etc. It can be applied at multiple scenarios.

SALIENT FEATURES

• Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same me, the authencation or attendance is valid.
• Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same me, the authencation or attendance will be failed
• 720p wide-angle dual-lens
• Face anti-spoofing
• Face recognition distance: 0.3 m to 1.5 m
• Deep learning algorithm
• 1500 face capacity, 1,500 card capacity and 150,000 event capacity
• Face recognition duration 0.2 s/User; face recognition accuracy rate ≥ 99%
• Capture linkage and captured pictures storage
• Transmits card and user data from or to the client software via TCP/IP protocol and saves the data on the client software

Face662 FACE RECOGNITION TERMINAL adopts deep learning algorithm, which helps to recognize the face faster with higher accuracy. It also supports multiple authencation modes: face authencation, etc. When installed on the turnstile, it can be applied in mutiple scenarios, such as buildings, enterprises, financial industries, and other important areas.

SALIENT FEATURES

•  3.97-inch touch screen
• 2 MP wide-angle dual-lens
• Face anti-spoofing
• Face recognition distance: 0.3 m to 1.5 m
• Deep learning algorithm
• 300 face capacity, 1,500 card capacity (when connecting external card reader); 150,000 event capacity, and up to 20,000 captured pictures storage
• Face recognition duration ??? 0.2 s/User; face recognition accuracy rate ≥ 99%
• Capture linkage and captured pictures storage

FacePro682 FACE RECOGNITION TERMINAL is a kind of access control device integrated with fever screening function. It can take body temperature and upload abnormal temperature event to the center, which can be widely applied in multiple scenarios. 

Additional Information:

• Item Code: SILKBIO100

The FacePro782TM is an IP based Face Recognization Terminal integrated with temperature scanning function.  It has fast taking skin surface temperature and upload abnormal temperture event in database with indicator and voice alarm which can be widely used in multiple scenario. The reader has THERMAL camera for better recognization.  

Additional Information:

• Production Capacity: 6000
• Delivery Time: immediate

The SF100 is an IP based fingerprint terminal works both in network and standalone modes. In network mode, it can connect with software for access control and time attendance management.

Wiegand output makes SF100 flexible to connect with any 3rd party controllers as a slave reader. Additionally wiegand input allows two units of SF100 to configure with each other and utilize Master & Slave solution, which requires user verification at both entrance and exit. Meanwhile, anti-passback function can be used to maximize the security.

Auxiliary input interface allows SF100 to connect with an external source, for instance, a smoke detector or emergency switch. Once the linkage function is enabled through the machine menu, the device would generate an alarm signal and open the door in case of emergency.

Uface800 is a multi-biometric identification Time Attendance terminal adopts latest Face 10.0 algorithm and large capacity memory .U Face series integrated 1.0 Ghz 32 Bit Speed with 4 Gb Flash Memory and high definition infrared camera enables user identification in the dark environment. Face Access Control System multi-biometric identification method will be applicable more widely. All operations of U Face are designed to be performed on the 4.3 inches TFT screen with keypad operation. Multi-model communications includes RS232/485, TCP/IP, optional Wi-Fi or GPRS.

Specifications:

Dimension(WxHxD): 193.6 * 165 * 111mm

Face Capacity: 3000 (1:N)

Finger User Storeage: 2,000

ID Card Capacity: 10,000

Transaction Storage: 1,00,000

Camera: High Resolution Infrared Camera

Communications: RS232, RS485, TCP/IP, USB

Processor: 1.0 Ghz 32 Bit Speed with 4 Gb Flash Memory

Identification time: < =2S

FAR:

FRR:

Temperature: 0°C - 45°C

Operating Humidity: 20%-80%

Power Supply: 12V DC, 3A

Optional Function: Mifare Card, Short Massage, WebServer, WiFi, GPRS, 9 Digit User, Work Code

Alogrithm Version: Face 10.0

Display: 4.3 Inch TFT Screen

Gross Weight: 1.87 Kg

Language: English

Battery: 2000 mAh

Additional Information:

• Item Code: UFACE800

ATC403 is an access control devices, which is made with elegant design and professional surface treatment. The device have lock control, alarm, exit button, door sensor. The wiegand-in interface is used to connect external reader to construct master and slave system. Also the device can be used to connect with a control panel as a reader by wiegand-out interface. The operation can be done on the device through LCD display, also can be done on PC software and upload to the device through TCP/IP, RS232/485 communication. The USB-host is used for data download and upload, including user template and record etc. ATC403 is suitable for house, small office and factory etc

The SF100 is an IP based fingerprint terminal works both in network and standalone modes. In network mode, it can connect with software for access control and time attendance management.

Wiegand output makes SF100 flexible to connect with any 3rd party controllers as a slave reader. Additionally wiegand input allows two units of SF100 to configure with each other and utilize Master & Slave solution, which requires user verification at both entrance and exit. Meanwhile, anti-passback function can be used to maximize the security.

Auxiliary input interface allows SF100 to connect with an external source, for instance, a smoke detector or emergency switch. Once the linkage function is enabled through the machine menu, the device would generate an alarm signal and open the door in case of emergency.